Thursday, May 31, 2007

Weller Introduces The WSB 80 Solder Bath

The Weller WSB 80 Solder Bath is an 80 watt / 24 volt solder bath that can be connected to any Weller power supply 80 watts or greater. The solder bath is used as a rework preparation tool to tin wire ends and to clean and tin component leads. It can also be used to clean extraneous solder particles in preparation for rework. The temperature range is 150F - 850F (50C - 450C). ESD safe. Compatible with lead free solders.

 

The image “http://www.cooperhandtools.com/onlinecatalog/images/0052704099_300.jpg” cannot be displayed, because it contains errors.
   

 
   
Product Details
Catalog No. 0052704099
UPC Code 037103222305
Fits Station WD1/WD2/WD1M/WD2M/WRS3000
Wattage 80 W
Temperature Range 150° F to 850° F
Voltage 24 V
Supplied Tip(s) None
Iron Stand None
Packaging Industrial Box/Carton
Low Res. Image 0052704099_100.jpg
High Res. Image 0052704099_300.jpg
Stock Item Normal Stock Item
   
Posted by Weller at 14:22:59 | Permanent Link | Comments (4) |
Comments
1 - Your math is wrong for the deg C temps.
it should be 454 C (Comment this)

Written by: JMR at 2007/06/01 - 12:50:55
profile
2 - Thanks for your comment, JMR. I have made the correction to the post. (Comment this)

Written by: The Weller Marketing Team at 2007/06/01 - 15:11:58
3 - Fine product, but just how big is the bath? (Comment this)

Written by: ALL at 2007/06/04 - 14:58:51
profile
4 - The bath is small, about one inch inside diameter and 1.5" deep. It is designed for tinning leads at a rework workstation...not really for higher volume production. For a higher capacity bath, try our WSB150. This larger bath requires a two port power supply such as WD2 or WD2M. (Comment this)

Written by: The Weller Marketing Team at 2007/06/04 - 21:08:17 in reply to: 3
Write a comment