Weller blog

We have received many calls from customers who have forgotten the lock codes they set when locking out the WD series soldering stations.  So we have decided to post the procedure for unlocking the stations here.

1. Activate Special Function menu 1 by holding down the two scroll keys for about two seconds. Scroll through the settings by pressing either of the first two Radio Buttons until you get to the lockout screen (small padlock icon in lower right corner).
    

2. Press Radio Button 1 to reveal three 3-digit unlock codes, which correspond with the three buttons.
   
   
   

3. Find the sequence of the three unlock codes in the master lock code
   list, which can be downloaded in Adobe Acrobat PDF format by clicking
   here.
   
                                             
   

4. Enter the lock code with the scroll keys, and press the Radio Button
   on the right to exit the Special Function 1 menu and return to normal
   operating mode (note: this is Radio Button 3 on the single port stations,
   and Radio Button 2 on dual port stations).
   
                                              
    

Your station is now unlocked, and you may adjust the temperature to whatever setting you desire.